2024 Norstar Iron Bull FLG22 26'

Information

2024 Norstar Iron Bull FLG22 26'

Decades of experience in our new manufacturing company have combined to create one of the most thought out trailers available - The FLG22 Gooseneck Low-Pro Equipment Trailer. With two 10k axles and tons of standard features, this model is a perfect fit for the contractor or weekend warrior. Iron Bull Goosenecks are some of the most rugged and longest lasting units in service today.

Our 102" wide 22k Low-Pro Gooseneck is by far our most popular model. Standard on all IronBull FLG models comes our pipe bridge to reduce torque under heavy loads. Heavy SCH40 construction outclasses thin walled pipe as seen on some of the competition. Low-Pro, pierced frame design lowers the deck 3" providing a lower center of gravity, more stable cornering and a lower loading angle for equipment. 12" 19lb/ft I-Beam makes up the main frame of these monsters - compared to the 14lb found on the other guys. Heavy duty 10" I-beam crossmembers are located on the lower main frame to further support the pipe bridge. These important steel beams are omitted by some competitors. 3" Channel crossmembers located in the deck frame are on 16" centers and topped with 2" x 8" treated pine wood - and you will find a standard locking toolbox at the front of each gooseneck trailer. Two 16" side steps adorn the front of each deck.

All wiring is in a sealed harness and runs inside the 2" x 8" upper deck frame. Fresh powder coat gives each trailer a rugged finish with a showroom shine. USA made, lifetime recessed LEDs are provided by TecNic lighting. Each Iron Bull Trailer also comes equipped with stake pockets, pipe spools and rub rails as well as an adjustable coupler. All Iron Bulls are sitting on electric brake axles and roll down the road on radial tires. Select from our multiple tail options including our Rampage Ramps or a hydraulic dove tail and corral your Iron Bull today.

Features may include:
  • 12" I-Beam Frame and Neck (19 lbs/ft)
  • 2 5/16" Adjustable Coupler
  • 3" Structural Crossmembers
  • 2.5 x 2.5 Front Bumper Rail
  • Lockable Full Neck Width Tool Box
  • Rub Rail, Stake Pockets & Pipe Spools
  • Standard Torque Tube & Underframe Bridge
  • Cambered Brake Axles
  • Multi-leaf Slipper Spring Suspension
  • E-Z Lube Hubs
  • 2 Electric Brake Axles
  • 25" Gooseneck Box
  • 8' Slide-in Ramps
  • 2-10k Drop-Leg Jack
  • Treated Pine 2x8 Floor
  • 4 Standard 3" D-Rings
  • 235/80R16 Radial Tires with 8 Hole Duals
  • Lifetime LED Lighting
  • All Lighting DOT Approved
  • Molded Sealed Harness with Resistors
  • 7-Way Receiver Female Plug with Adapter
  • Powder Coat

Photos

Highlights

  • Bolton, Connecticut
  • 2024
  • Norstar
  • Iron Bull FLG22 26'
  • Neck: 12" I-Beam Neck and Risers (19lb/ft)
  • Available

Specifications

  • 2024
  • Norstar
  • Iron Bull FLG22
  • 26'
  • Flatbed
  • 26'
  • 32.5 "
  • Neck: 12" I-Beam Neck and Risers (19lb/ft)
  • 12" I-Beam Neck and Risers (19lb/ft)
  • 2
  • 10,000 lbs